Blitz Electronics
Turbo Timers
Fatt DC II
 The slickest
new turbo timer from Blitz is the Fatt DC II, available in either
silver or black case. Features: Manual Timer - Allows the user to
preset count down time. Automatic Timer - The FATT DC II has the
ability to calculate the count down time by the how the vehicle
was driven. There are 5 different types A-L - will start to calculate
time automatically after 1800rpm. Low setting A-S - will start to
calculate time automatically after 1200rpm. Medium setting A-H -
will start to calculate time automatically after 900rpm. High setting
E-L - will start to calculate time according to how long the ignition
has been on. Adds 55 seconds per hour. E-H - will start to calculate
time according to how long the ignition has been on. Adds130 seconds
per hour. Voltage Display - The FATT DC II has a built in voltage
display. This allows the user to monitor the vehicle's charging
system. Temperature Display - The FATT DC II also has a built in
air temperature display. This allows the user to monitor the cabin
temperature. Stop Watch and Lap - Timer This unique feature allows
the user to use the stop watch function and also can record up to
5 lap times. Adjustable Display - This turbo timer can also allow
the user to adjust how the bar display moves. There are 4 different
display types, one moves according to throttle and the others are
programmed movements. Adjustable Contrast - Allows the user to adjust
the contrast setting.
| BP-BLI14356 |
FATT DC II (Black Case) |
$84.95 |
|
| BP-BLI14357 |
FATT DC II (Silver Case) |
$84.95 |
|
Dual T/T II
 Manual Timer
Allows the user to preset count down time. Automatic Timer The Dual
DC II has the ability to calculate the count down according to boost
levels and the amount of time that the vehicle was driven. There
are 5 different types. A-L - will start to calculate time automatically
after 0.2HKPA. Low setting A-S - will start to calculate time automatically
after 0.2HKPA while adding more time then in mode A-L. Medium setting
A-H - will start to calculate time automatically after 0.1HKPA.
High setting E-L - will start to calculate time according to how
long the ignition has been on. Adds 55 seconds per hour. E-H - will
start to calculate time according to how long the ignition has been
on. Adds130 seconds per hour. Boost Gauge - The DTT DC II has a
built in digital boost gauge that reads up to 2.5hkpa (36.75psi)
Peak Hold - The Peak hold function records the highest boost that
the vehicle has reached. Boost Warning - This allows the user to
preset the boost warning. Stop Watch and Lap Timer - This unique
feature allows the user to use the stop watch function and also
can record up to 5 lap times. Adjustable Contrast - Allows the user
to adjust the contrast setting.
| BP-BLI14358 |
Dual T/T DC II (Black Case) |
$127.00 |
|
| BP-BLI14359 |
Dual T/T DC II (Silver Case) |
$127.00 |
|
Turbo Timer Harness
| Nissan |
| BP-BLI51103 |
89-93 300ZX Twin Turbo (NS-04) |
$21.12 |
|
| Mazda |
| BP-BLI32027 |
85-91 RX7 FC3S |
$17.60 |
|
| BP-BLI51251 |
93-95 RX7 FD3S (MZ-02) |
$21.12 |
|
| Mitsubishi |
| BP-BLI51201 |
3000GT All (MI-02) |
$21.12 |
|
| BP-BLI51201 |
89-94 Eclipse (MI-02) |
$21.12 |
|
| BP-BLI51203 |
95-99 Eclipse (MI-04) |
$21.12 |
|
| Toyota |
| BP-BLI51150 |
86-92 Supra 7M-GTE (TY-01) |
$17.60 |
|
| BP-BLI51153 |
93-96 Supra Twin Turbo (TY-04) |
$17.60 |
|
| BP-BLI51155 |
97-98 Supra Twin Turbo (TY-06) |
$17.60 |
|
| BP-BLI51152 |
89-94 MR2/Celica ST185 (TY-03) |
$17.60 |
|
Boost Controllers
SBC I-D Boost Controller
 The Sequential
Boost Controller i-D (SBC i-D) is the latest boost controller offer
by BLITZ. This unique boost controller represents the cutting edge
in boost controller technology. The SBC i-D features the same dual
solenoid design as the DSBC for maximum boost response and the capability
to hold up to 36.75psi (2.5 bar). The SBC i-D is 1/2 din size and
it is compatible with internal actuators and external wastegates.
| BP-BLI15055 |
SBC I-D Boost Controller |
$588.72 |
|
| BP-BLI15053 |
SBC I-D Optional Harness |
$39.60 |
|
Power Meter I-D
 The Power
Meter i-D is a unique monitoring tool that measures and displays
horsepower and speed. The Power Meteor i-D is one of the only units
in the world that can display both standard and metric measurements.
Power output can be display in HP, PS and kW. Speed can be displayed
in MPH and km/h. Both power and speed can be displayed in digital
and graphical form. The Power Meter id also has a Chassis Dynamo
function, which plots Horsepower to Speed in a graph form.
| BP-BLI15056 |
Power Meter I-D |
$262.24 |
|
DSBC Spec S (Single Solenoid)
 The Dual Solenoid
Boost Controller Spec S (DSBC Spec S) has four programmable boost
settings or various levels of boost. This unit features a built-in
boost gauge, peak boost display, four different boost settings,
boost warning, scramble boost, and a boost limiter safety feature
to prevent over boosting. The DSBC Spec S uses a single solenoid
design for better boost response. The DSBC Spec S is 1/4 din in
size and is compatible with internal actuators and external wastegates.
This unit is available in a silver case with an green LCD display.
The difference between the DSBC Spec R and Spec S is the solenoid
design. Spec R uses dual solenoid while the Spec S uses a single
solenoid design.
| BP-BLI15058 |
DSBC Spec S (Single Solenoid) |
$343.20 |
|
DSBC Spec R (Twin Solenoid)
 The Dual
Solenoid Boost Controller Spec R (DSBC Spec R) has four programmable
boost settings or various levels of boost. This unit features a
built-in boost gauge, peak boost display, four different boost settings,
boost warning, scramble boost, and a boost limiter safety feature
to prevent over boosting. The DSBC Spec R uses a dual solenoid design
for maximum boost response. This unit is capable of handling boost
up to 2.5bar (36psi). The DSBC Spec R is 1/4 din in size and is
compatible with internal actuators and external wastegates. This
unit is available in a silver case with an green LCD display. The
difference between the DSBC Spec R and Spec S is the solenoid design.
Spec R uses dual solenoid while the Spec S uses a single solenoid
design.
| BP-BLI15059 |
DSBC Spec R (Twin Solenoid) |
$466.40 |
|
SBC DC
 The SBC DC is
the newest boost controller added to the BLITZ line. This boost
controller features the same dual solenoid design as the SBC i-D
and DSBC Spec R. The Dual Solenoid design allows maximum boost response
and is capable of handling boost up to 36.75psi (2.5bar). The SBC
DC is 1/2 din size and is compatible with any actuator type wastegates
and external wastegates.
| BP-BLI15060 |
SBC DC |
$519.20 |
|
|
| Copyright 2004 BoneHeadPerformance.com |
|
Home
View Cart 
