TurboSmart Manual Boost Controller
A Turbosmart GBCV will allow boost pressure to be adjusted above the standard setting To avoid using un-reliable methods of increasing Boost, such as shortening the actuator rod. This causes spring bind in the actuator and restricts flow through the wastegate. It avoids having to replace wastegate springs, which only give a fixed increase, which is not adjustable.

Why choose a Turbosmart GBCV? All our GBCV’s feature the Gated System - unique to Turbosmart. This delays the pressure signal from entering the wastegate, which inturn spools up the turbo faster, resulting in more boost at lower RPM. Setting the desired boost pressure is made easy. Simply adjust the Boost Dial on the top of the unit, without the need for any tools. Turbosmart Boost controllers are capable of increasing boost pressure to the threshold of your turbo’s capacity. All Turbosmart GBCV’s can be locked to prevent tampering All Turbosmart GBCV’s come with comprehensive directions.

$74.00-

TurboSmart Dual Stage Boost Controller

Compact design, will fit in the palm of your hand. This unit provides fast boost response with two adjustable boost levels. Just toggle between high and low on the fly. Ideal for replacing factory boost controllers. Low and high Boost settings are fully adjustable Detent System for ease of adjustment Gated System to bring boost on faster. Includes Rocket Launcher Switch and fitting hardware.

$184.00

TurboSmart Single Stage Boost Controller

Compact design, will fit in the palm of your hand. This unit provides fast boost response with one adjustable boost level. Ideal for turbo cars without factory boost controllers. Switch between standard and high boost from inside your car. High Boost setting is fully adjustable Detent System for ease of adjustment Gated System to bring boost on faster. Includes Rocket Launcher Switch and fitting hardware.

TurboSmart E-Boost Gauge w/ Electronic Boost Controller

The e-Boost is the worlds first re-programmable boost controller utilizing FLASH memory technology, making it compatible with future software upgrades, meaning your e-Boost will never be out-dated. The e-Boost is more than just the best performing electronic boost controller, it is a complete boost management system, making Turbosmart a world leader in boost control systems. That's right folks this is a boost gauge & boost controller in the same package.

This revolutionary product is loaded with features, squeezed into a package small enough to fit in the palm of your hand: The latest in Hi-tech electronics, featuring a 16 bit RISC based FLASH memory CPU

• faster and smoother boost response Utilizes the latest in surface mount technology
• lighter, smaller and ultra compact Electronics are housed in an anodized billet aluminum alloy housing
• offering durability and reliability in harsh race conditions Programmable gate pressure function to totally eliminate wastegate creep
• you tell the wastegate when to open Three internally or externally activated and individually programmable boost set points Drag racers
• improve your launch, run a different boost in each gear High accuracy boost and vacuum display, readout accurate to within +/- 0.5% of full scale, boost gauge no longer required
• great value Readout can be tailored to suit your needs – display can be configured in KPA, Bar or PSI Easy to read seven segment display with programmable bar graph and glow in the dark buttons Programmable auxiliary output
• e.g. water spray control, water/methanol injection, boost light Programmable audible warning alarm
• excellent for over-boost warning or full boost confirmation Peak hold/Max Boost recall function Revolutionary gauge type construction allows many practical mounting solutions
• 66mm in diameter 55mm long. Suitable for Panel mounting, or in any 2 5/8 inch gauge pod or pillar mounting system.

$449.00