|
Yonaka Motorsports Intercoolers
Monster Intercooler Type
12 26"x12"x4"
This
is our largest bar and plate front mount intercooler with
end tanks. It is the biggest, baddest intercooler ever made.
We simply call it "The Monster".
With a 4" thick bar and plate core that is over 2 feet long,
this intercooler can flow enough cfm to support 1000hp! This
intercooler is most popular with large horsepower applications
such as single turbo Supras, RX-7s, Skylines, and race-only
Honda applications.
Dimensions:
- Bar and plate design
- End to end length with tanks: 33.5"
- Core Size: 26" long x 12" high x 4" thick
- Inlet/outlet diameters: 3"
Performance:
- Supports up to 1000 hp
- Leak tested at 30 psi
Application: Designed for use in large flow requirement custom
turbo setup. It is perfect for any big-boost application for
all types of vehicles. Small street turbos need not apply! |
$309.00
Intercooler Type 11 26x12x3"
 This
is a full aluminum intercooler with end tanks. Popular for large
boost applications for most turbocharged imports.
Dimensions:
- End to end length with endtanks: 33.5"
- Core Size: 26" long x 12" high x 3" thick
- Inlet/outlet diameters: 3"
Performance:
- Supports more than 650 hp
- Flows up to 900 cfm
- Leak tested at 30 psi
Application: Designed for use in any custom or upgraded stock
turbo setup. It is perfect for any big-boost application for
Nissan, Toyota, or Mitsubishi. |
$239.00
Intercooler Type 10 22x9x3"
 This
is a full aluminum bar and plate intercooler with polished cast
end tanks. This intercooler is out most popular size for 1G/2G
Mitsubishi Eclipses, as well as turbocharged Honda B18C/H22A
platforms. Perfect for your DSM, Honda, Nissan or other custom
turbo project.
Dimensions:
- Bar and plate design
- End to end length with endtanks: 31"
- Core
Size: 22" long x 9" high x 3" thick
- Inlet/outlet diameters: 2.5"
Performance:
- Supports up to 550
hp.
- Flows up to 800 cfm.
- Leak tested at 30 psi.
Application: Designed for use in any custom or upgraded
stock turbo setup. It is perfect for any medium to big-boost application for Nissan, Toyota, Honda or
Mitsubishi. |
$189.00
Intercooler Type 9 18x6x2.5"
 This
is a full aluminum intercooler with polished cast end tanks.
Dimensions:
- Bar and plate design
- End to end length
with endtanks: 26"
- Core Size: 18" long x 6" high x 2.5" thick
- Inlet/outlet diameters:
2.5"
Performance:
- Supports more than 275 hp
- Flows up to 350 cfm
- Leak tested at 30
psi
Application: Designed for use in any custom or upgraded stock turbo setup. It is perfect for any big-boost
application for Honda. |
$169.00
Intercooler Type 6 18x9x2"
 This
is a full aluminum intercooler with polished cast end tanks.
Dimensions:
- Bar and plate design
- End to end length:
26 inches
- Core Size: 18" long x 9" high x 2" thick
- Inlet/outlet diameters: 2.5"
Performance:
-
Supports more than 350 hp
- Flows up to 500 cfm
- Leak tested at 30 psi
Application: Designed for use in
any custom or upgraded stock turbo setup. It is perfect for any big-boost application for
Honda. |
$169.00
|
Home
View Cart 
